Matrixes

General FRP products.

TPYE	NAME	CHARACTERISTIC	APPLICATIONS
Hand-Lay up Spray up	G-774TS(Y)P , DU-111	Good impregnation No-drain out , Good-mechanical properties	Fishing boat , Yachts Bath-tubs , Water tanks , etc.
Chemical linning	RF1001H	High heat resistance , High chemical resistance	Fishing boat ,Yachts Bath-tubs , Water tanks , etc.
SMC , BMC , Press molding	N21B , N-34OK , G-82	Low shrinkage , High heat resistance , Good impregnation	SMC & BMC premix , Bath-tubs , Septic tanks
FW & Pultrusion	N-37CH	High chemical resistance , High strength	Pultrusion’s poles , Fishing rods , Filament winding’s pipe
Casting	G-227	Good transporency , Low exothermic , Low reactive	Artistic products
Continuous prooess	G-153ALX	High transporency for continuous laminating	Conugated sheet
Gel coat	G-710BYX , N-370L , N-325	Low visoosity , Water resistance , Chemical resistance	General type of gel coat
Button	G-582A , G-465B	In room temperature for making button use	Promoter : KNA

Bisphenol-A Epoxy Vinyl Ester Resins

Product	Styrene Content%	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCOR901	45	450	108	9	Excellent mechanical properties and chemical resistance, such as acids, alkalies, oxidizing chemicals and salt solutions etc. Excellent fatique resistance. Quick strength build-up. Can comply with US FDA_regulation. DNV and Lloyd’s register approval for marine.
SWANCORCHEMPULSE901	45	350	103	9	Premium product with higher reactivity and same mechnical properties and chemical resistance like SWANCOR 901. Lower viscosity for better wetting and handling. Lower extherm i.e. labor saving and quality improving. Can comply with US FDA regulation.
SWANCOR901-35	35	2,500	101	9	Low styrene content version of SWANCOR 901, with the same molecular weight providing excellent mechanical properties and chemical resistance as SWANCOR 901. Cost saving alternative.
SWANCOR901-2T	–	3000	100	4	Suitable for CIPP application Excellent mechanical properties and chemical resistance as SWANCOR 901. High Thix Index >3.5. Medium elongation.
SWANCOR901-V	48	150	103	6	Lower viscosity version of SWANCOR 901, with the same molecular weight providing excellent mechanical properties and chemical resistance as SWANCOR 901. Suitable for vacuum infusion process.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note:* The figures shown above are typical properties and are not construed as specifications.

Brominated Epoxy Vinyl Ester Resins

Product	Styrene Content%	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCOR905-2	42	380	108	6	Suitable for flame retardant applications. Meet ASTM E84 Class 1 while incorporated with 3-5% Antimony Trioxide or 3.75% Nyacol APE 3040. Excellent mechanical properties and chemical resistance as SWANCOR 901. Suitable for various fabrication process like hand layup, filament winding, pultrusion etc.Can comply with US FDA regulation.
SWANCOR905C	35	380	111	6	Suitable for flame retardant applications. Meet ASTM E84 Class 1 while incorporated with 3.75% Nyacol APE 3040. Excellent mechanical properties and chemical resistance as SWANCOR 901. Suitable for various fabrication process like hand layup, filament winding, pultrusion etc.
SWANCOR905-N	38	350	133	3	Combination of flame retardance, improved elevated heat resistance and excellent chemical resistance. Meet ASTM E84 Class 1 while incorporated with 3-5% Antimony Trioxide.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note:* The figwes shown above are typical properties and are not construed as specifications.

Novolac Epoxy Vinyl Ester Resins

Product	Styrene Content%	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCOR907	39	430	148	4	Surperior mechanical properties and chemical resistance at elevated temperature. High heat distortion temperature with excellent fatique resistance. Suitable for more aggressive corrossive applications. Various fabrication process like hand layup, filament winding, pultrusion etc. Can comply with US FDA regulation.
SWANCOR900	35	400	163	3	Surperior mechanical propertiesand chemical resistance at elevated temperature. High heat distortion temperature with excellent fatique resistance.
SWANCOR977	35	400	163	3	Surperior mechanical propertiesand chemical resistance at elevated temperature. Suitable for solvent resistance applications.
SWANCOR977-S	28	750	208	3	Suitable for extreme hightemperature environment. High heat distortion temperaturewith excellent fatique resistance.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note:* The figures shown above are typical properties and are not construed as specifications.

Elastomer Modified Epoxy Vinyl Ester Resins

Product	Styrene Content%	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCOR908	39	430	148	4	Higher elongation with toughness than Bisphenol A epoxy vinyl ester resin. Good heat resistance. Suitable for contact molding for sporting parts.
SWANCOR950	35	400	163	3	High elongation with excellent resilience. Suitable for non-critical corrosive applications.
SWANCOR980	35	400	163	3	High elongation with high toughness i.e. high impact strength. Suitable for non-critical corrosive applications.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note:* The figures shown above are typical properties and are not construed as specifications.

Vinyl Ester Primers

Product	Appearance	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCORCP99	Clear amberliquid	225	100	6	Vinyl ester primer for concrete. Excellent adhesion to concrete. High heat resistance and excellent chemical resistance.
SWANCOR984	Opaquetwo-phaseliquid	400	82	4	Vinyl ester primer for concrete, carbon steel, stainless steel and old FRP. Excellent resilience and adhesion to metal.
SWANCOR917	Clear amberliquid	425	145	3	Vinyl ester primer for both metal and concrete. Excellent adhesion to both metal and concrete. Excellent heat resistance and chemical resistance.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note :* The figures shown above are typical properties and are not construed as specifications.

Thickenable Epoxy Vinyl Ester Resins

Product	Styrene Content%	Viscosity(25oC),cps	HeatDistortion Temperature,oC	*Shelf LifeMonths1**	Description
SWANCOR976	42	2,600	115	4	Modified Bisphenol A epoxy vinyl ester resin. Good heat distortion temperature and improved toughness. Excellent fatique resistance. Suitable for compression molding process.
SWANCOR978	40	1,700	100	4	Modified Bisphenol A epoxy vinyl ester resin. Good heat distortion temperature. Excellent fatique resistance. Suitable for compression molding process.
1 Shelf life indicates the minimum storage time while resins are stored in the dark under 25oC Note : The figures shown above are typical properties and are not construed as specifications.